mimix broadband's 2.5-6.0/5.0-12.0 ghz smd active doubler delivers + 17 dbm of output power. the device combines an active doubler with an output buffer amplifier that delivers constant power over a range of input powers. the device has excellent rejection of the fundamental and harmonic products and requires a single positive bias supply. this device uses mimix broadband's 2 um gaas hbt device model technology to ensure high reliability and uniformity. the device comes in a low-cost 4x4 mm qfn surface mount plastic package offering excellent rf and thermal properties and is rohs compliant. this device is well suited for point-to-point radio, microwave, lmds, satcom and vsat applications. 2.5-6.0/5.0-12.0 ghz active doubler qfn, 4x4 mm octave bandwidth operation +17 dbm output power -35 dbc fundamental leakage +5.0v, 125ma bias supply smd, 4x4 mm qfn package rohs compliant 100% rf, dc and output power testing features electrical characteristics (ambient temperature t = 25 o c) parameter input frequency range (fin) output frequency range (fout) input return loss (s11) output return loss (s22) saturated output power (psat) rf input power (rf pin) fundamental leakage (fin) third harmonic leakage (3xfin) fourth harmonic leakage (4xfin) bias voltage (vcc) supply current units ghz ghz db db dbm dbm dbc dbc dbc vdc ma min. 2.5 5.0 - - +14 -3.0 - - - - - typ. - - -15 -7 +17 - -35 -30 -20 +5.0 125 max. 6.0 12.0 - - - +3.0 - - - +5.5 140 absolute maximum ratings supply voltage (vcc) supply current (id) input power (rf pin) storage temperature (tstg) operating temperature (ta) junction temperature (tj) +6.0 vdc 200 ma +10.0 dbm -65 to +165 o c -55 to mttf table mttf table page 1 of 7 1 (1) junction temperature affects a device's mttf. it is recommended to keep junction temperature as low as possible for maximum life. 1 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2007 - rev 15-mar-07 general description x1002-qh
doubler measurements page 2 of 7 2.5-6.0/5.0-12.0 ghz active doubler qfn, 4x4 mm (x2) output power vs output frequency 0 2 4 6 8 10 12 14 16 18 20 4 5 6 7 8 9 1011121314 fout = 2xfin (ghz) pout (dbm) -3 dbm input 0 dbm input +3 dbm input fundamental leakage (dbm) -25 -20 -15 -10 -5 0 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 fout = fin (ghz) fundamental pout (dbm) -3 dbm input 0 dbm input +3 dbm input fundamental suppression (dbc) wrt output level -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 fout = fin (ghz) fundamental suppression (dbc) -3 dbm input 0 dbm input +3 dbm input (3xfin) harmonic suppression (dbc) wrt output level -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 6 8 10 12 14 16 18 20 fout = 3xfin (ghz) (3xfin) harmonic suppression (dbc) -3 dbm input 0 dbm input +3 dbm input (4xfin) harmonic suppression wrt output level -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 8 10121416182022242628 fout = 4xfin (ghz) (4xfin) harmonic suppression (dbc) -3 dbm input 0 dbm input +3 dbm input x1002-qh mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2007 - rev 15-mar-07
doubler measurements (cont.) page 3 of 7 2.5-6.0/5.0-12.0 ghz active doubler qfn, 4x4 mm s11 (db) -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 (ghz) (db) s22 (db) -16.00 -14.00 -12.00 -10.00 -8.00 -6.00 -4.00 -2.00 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 (ghz) (db) x1002-qh mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2007 - rev 15-mar-07 output pow er (2xfin) at +25c, +85c and -40c 0 2 4 6 8 10 12 14 16 18 20 4567891011121314 2xf in (ghz) p out ( db m) +25 c -40c +85c fund . rejection (dbc) at +25c, +85c and -40c -40 -35 -30 -25 -20 -15 -10 -5 0 23456 fi n ( g hz ) f unda mental r eject ion ( db c ) +25c -40 c +85c 7 3xfin rejection (dbc) at +25c, +85c and -40c -60 -50 -40 -30 -20 -10 0 7 9 11 13 15 17 19 21 3xf in (ghz) 3xf in rejecti on (d b c ) +25c -40 c +85c 4xfin rejection (dbc) at +25c, +85c and -40c -40 -35 -30 -25 -20 -15 -10 -5 0 8 10121416182022242628 4xf in (ghz) 4xf in rejecti on (d b c ) +25c -40 c +85c
?yy? = package style (2 chars) ?aaaaaaa? = lot-wafer # (7 chars max) pin 1 marker ?xxxxxx? = part number (6 chars max) ?c? = country of origin (1 char) ?yyww? = date stamp (year-year-week-week) ?p? = plating option (1 char) xxxxxxyy aaaaaaa cyywwp e x x = 2 nd level interconnect material (jesd97) pb-free category symbol r r = revision xx1002-qh wwwwwww pxxxxg page 4 of 7 2.5-6.0/5.0-12.0 ghz active doubler qfn, 4x4 mm (note: engineering designator is 5dbl0644qh) units: millimeters package outline package labeling x1002-qh top view .35 x .35 chamfer mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. bottom view march 2007 - rev 15-mar-07
page 5 of 7 2.5-6.0/5.0-12.0 ghz active doubler qfn, 4x4 mm pcb layout x1002-qh mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. c1 = 1nf, c2 = 1f vcc march 2007 - rev 15-mar-07
page 6 of 7 app note [1] biasing - the device is operated by biasing vcc=5.0 v which will draw typically 125ma and a maximum of 140ma. the device requires by-passing as shown in the recommended layout with c1=1nf and c2=1f. mttf tables these numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricati ng foundry. backplate temperature 55 deg celsius 75 deg celsius 95 deg celsius fits 375 3321 22440 mttf hours 2.67e+06 3.01e+05 4.46e+04 bias conditions: vcc=5.0v, icc=125 ma pin 3 16 22 description rf in rf out vcc all other pins ? gnd 2.5-6.0/5.0-12.0 ghz active doubler qfn, 4x4 mm x1002-qh mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2007 - rev 15-mar-07 functional schematic
page 7 of 7 2.5-6.0/5.0-12.0 ghz active doubler qfn, 4x4 mm handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to aff ect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. the package is a low-cost plastic package. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs complian t components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts i s 100% matt tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. part number for ordering description xx1002-qh-0g00 matte tin plated rohs compliant qfn 4x4 24l surface mount package in bulk quantity xx1002-qh-0g0t matte tin plated rohs compliant qfn 4x4 24l surface mount package in tape and reel xx1002-qh-ev1 xx1002-qh evaluation board we also offer this part with snpb (tin-lead) or nipdau plating. please contact your regional sales manager for more information regarding different plating types. typical reflow profiles reflow profile ramp up rate activation time and temperature time above melting point max peak temperature time within 5 oc of peak ramp down rate snpb 3-4 oc/sec 60-120 sec @ 140-160 oc 60-150 sec 240 oc 10-20 sec 4-6 oc/sec pb free 3-4 oc/sec 60-180 sec @ 170-200 oc 60-150 sec 265 oc 10-20 sec 4-6 oc/sec x1002-qh mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2007 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2007 - rev 15-mar-07
|
